Patton Smartlink M-ATA VoIP Converter 1 x FXS

Patton Smartlink M-ATA VoIP Converter 1 x FXS

De Patton Smartlink M-ATA VoIP converter converteert analoge telefoons en fax apparaten naar VoIP. De Patton Smartlink M-ATA heeft 1 FXS aansluiting voor analoge telefoons en fax.

• 1 FXS aansluiting
• Geschikt voor analoge telefoons
• Geschikt voor fax apparaten
• SIP & MGCP ondersteuning
• VLAN tagging

Deze professionele voip converter maakt iedere analoge telefoon of fax geschikt voor VoIP via SIP of MGCP.
De Patton SMartlink M-ATA is voorzien van 1 aansluiting voor 100 Mbps LAN en 1 x FXS voor uw telefonie.



Uitgebreide specificaties Patton Smartlink M-ATA


2-wire Loopstart, RJ-11/12
Short haul loop 1.1 km @3REN
Caller-ID Type-1/2 FSK and ITU V.23/Bell 202 generation

1 x 10/100Base-TX Full Duplex/Autosensing Ethernet RJ-45
SIP
MGCP

G.711 A-Law/µ-Law (64 kbps)
G.726 (ADPCM 40, 32, 24, 16 kbps)
G.723.1 (5.3 or 6.3 kbps)
G.729ab (8 kbps)

G.168 echo cancellation

2 parallel voice connections

DTMF detection and generation

Carrier tone detection and generation

Silence suppression and comfort noise

Configurable dejitter buffer

DTMF in-band & out-of-band

Configurable transmit packet length

RTP/RTCP (RFC 1889)

STUN
Fax and Modem Support

G.711 transparent FAX

T.38 Fax relay (9.6 k, 14.4 k)
Voice Services/Features

Anonymous CallerID block

Call blocking

Call forward - on busy

Call forward - selective

Call forward - unconditional

Call hold/retrieve

Call return

Call transfer - blind

Call transfer - with consultation

Call waiting/retrieval

Caller-ID

Conference drop

Conferencing (3-way calling)

Distinctive ring

Do not disturb

Hotline calling

Incoming CallerID on/off

IP URL dialing

Message waiting indication

Self-caller ID block

Speed dial

Voicemail message retrieval

Warmline calling
IP Services

NAPT

DHCP client

PPPoE

Programmable static routes

ICMP redirect (RFC 792); Packet fragmentation

VLAN support 802.1p/q
Management

Browser configuration interface

Multilevel security access

TFTP & HTTP configuration & firmware loading

SNMP v2 agent (MIB II and private MIB)

Syslog support
Operating Environment

Operating temperature: 0-40°C (32–104°F)

Operating humidity: 5-80% (non condensing) )
System Power: 100-240 VAC (50/60 Hz)
Compliance

EMC compliance: EN55022 and EN55024

Safety compliance: EN 50950

CE compliance

FCC Part 15 Class B
Physical

Dimensions: 3.6L x 2.1W x 0.78H in. (9.0L x 5.3W x 1.9H cm)

Weight: 0.2 lbs (0.09 kg)

Reviews

Schrijf hier als eerste uw ervaring over het product!